Apr 01, 2024 Leave a message

Combiner Box Composition

Box
The box body is generally made of steel plate spraying, stainless steel, engineering plastics and other materials, with beautiful appearance, strong and durable, simple and convenient installation, protection level of IP 54 or above, waterproof and dustproof, to meet the requirements of outdoor long-term use.
DC circuit breakers
The DC circuit breaker is the output control device of the entire combiner box, which is mainly used for opening/closing the line. Its operating voltage is as high as DC1 000 V. Because the power generated by solar modules is direct current, it is easy to produce arcing when the circuit is broken, so it is necessary to fully consider its temperature and altitude reduction coefficient when selecting the type, and it is necessary to choose a special DC circuit breaker for photovoltaics.
DC fuses
When the module backflush current occurs, the PV special DC fuse can cut off the fault string in time, with a rated working voltage of DC1 000 V and a rated current of 15 A (crystalline silicon module). The DC fuse used in photovoltaic modules is a special fuse specially designed for the photovoltaic system (10 mm × 38 mm), which is installed with a special enclosed base to avoid the current backfilling between the strings and burn the module. When current backfill occurs, the DC fuse quickly exits the faulty string from the system operation without affecting other normally working strings, which can safely protect the PV string and its conductors from the threat of reverse overload current.
Anti-reflection diode
In the combiner box, the diode has a different role than the diode in the component junction box. The diodes in the module junction box are mainly used to provide a freewheeling channel when the cells are occluded, while the diodes in the combiner box are mainly used to prevent circulation between strings.
Data acquisition module
In order to facilitate the monitoring of the working status of the entire power station, a data acquisition module is generally added to the first-level combiner box. Using Hall current sensor and single-chip microcomputer technology, the current signal (analog) of each photovoltaic array is sampled, and after A/D conversion into digital, it is converted into a standard RS-485 digital signal output, which is convenient for users to grasp the working status of the entire power station in real time.
Protection unit
DC high voltage surge protection unit
The DC high-voltage surge protection unit is a special lightning protection product for photovoltaic power generation system, which has the dual self-protection function of overheating and overcurrent; It adopts modular design, can be replaced with electricity, and has a deterioration display window; It can be equipped with remote signaling alarm device, and remote monitoring can be realized by using the data acquisition module.
Hmi
The data acquisition unit is equipped with a man-machine interface, through which the real-time working status of the equipment can be viewed, the real-time working status of the equipment can be realized through the keyboard, and the local setting of the equipment parameters can be realized through the keyboard.
 

Send Inquiry

Home

Phone

E-mail

Inquiry